EEE-Ultra Shine 250mL
Description
A cut and paste wax containing Tripoli powder; an ultra fine abrasive.
The polish is designed to be used in conjunction with Shellawax and Shellawax Cream or as a finish in its own right on plastics and some stone.
It can eliminate all sanding marks from most timbers and can greatly reduce your sanding time while leaving a blemish-free surface; burnished (pre-polish) and ready for you to apply finish to.
Ultra Shine can also be used by French polishers after polishing and by restorers to cut and polish old polished surfaces.
Manufactured by uBeaut Polishes, Australia.
PLEASE TAKE NOTE OF THE FOLLOWING
THIS IS A WAX.
WAX MELTS IN EXTREME HEAT
SO KEEP IT COOL!
If the top of the wax or just below has a translucent or whitish surface it has been heat affected
ie: partially melted allowing a little of the carrier to come towards the top of the mix.
This can be discarded, mixed back in or fixed properly as per the information below:
To FIX MELTED EEE: Put container in hot water to melt contents, when melted stir with non
metal stirrer until mix begins to cool & thicken otherwise the abrasive may drop out of the mix.
To REJUVENATE HARD EEE: Do the same as above but, add a small amount of Mineral Turpentine (White Spirits).
eg: For half a jar add 1 desert spoon, if really dry add 1 tablespoon, too much will just make it runny. More can be added if really needed but don’t double up the above.
DO NOT leave rag inside jar.
DO NOT remove foil disc from inside lid.
Please ensure the lid is always securely fastened.
Downloads
-
AucklandAvailable
-
ChristchurchAvailable
You may also be interested in...
-
UB-S1LTR
-
AucklandAvailable
-
ChristchurchAvailable
-
-
KM-ROT-SET
-
AucklandAvailable
-
ChristchurchLimited Stock
-
-
UB-S1KG
-
AucklandAvailable
-
ChristchurchLimited Stock
-
-
