Industrial 8in Jointer-Spiral cutter Head NZ Guard
Description
New look, new code, same great machine (was CTJ-350X)
The Carba-Tec 8" Industrial Long Bed Jointer. Simply the best jointer in its class bar none! Features an extra long 1950mm bed for superior stock support and a superior parallelogram system for easy and accurate table adjustments. This system also produces less chipping as the tables follow the arc of the cutterblock when the table is raised or lowered. It also allows for more positive adjustment and there is none of the slack frequently found when using ordinary screw-type adjustment wheels. A centre-mounted tilt fence provides solid support and a spiral cutterhead provides a smooth cut at 16,500cpm.
While the cut depth per pass of the helical cutterheads may be less than equivalent standard cutterheads, they offer a number of significant advantages. Spiral cutterheads revolutionise your woodwork, offering quieter cutting as well as less chatter and tear-out in curly or highly figured wood; these cutterheads save hours of cleanup work after dressing timber. This machine's 40 four-sided cutter knives (which can be turned to offer a new cutting edge in seconds) are made of fine grain tungsten carbide and are held in place by a Torx style screw. Knives of this type last three to five times longer than good quality HSS knives. Multiply this by four cutting edges and you achieve 12 to 20 times the normal blade life of a HSS blade set. Easily turned and seated; they present a fully sharpened and indexed cutting edge. No complex blade setting or jigs are required - you simply replace the blade when all four edges have been used. This style of cutterhead also reduces the size of shavings when cutting; increasing the effectiveness of your dust collection setup.
NOTE:
1. NZ machines are sold with Bridge Guards over the cutter rather than the swinging guard shown in the photos.
2. The overhand planing function of this machine is commonly called a jointer as it is for creating straight and square edges for joints between boards. This overhand operation has also been called a "Buzzer" due to the noise made by straight knife machines. Many people refer to these machines where timber travels over the top of the cutter as Buzzers.
Product Specifications:
* motor 1.5HP, 230V, 1PH, 10A plug
* table length 1950mm
* table width 200mm
* rabbeting capacity 17 x 200mm
* fence tilt -45° to +45°
* fence stops -45° / 90° / +45°
* cutter knives 40 x 4 Sided Tungsten Carbide cutters
* dust port 1 x 4"
* workshop footprint 1950 x 670 x 1310mm
* net weight 230
* shipping weight 245
-
AucklandSorry, not in stock. Please contact us to backorder
-
ChristchurchSorry, not in stock. Please contact us to backorder
You may also be interested in...
-
JN-L150C
-
AucklandAvailable
-
ChristchurchLimited Stock
-
-
JN-200COffer Ends 15/12/24
-
AucklandLimited Stock
-
ChristchurchLimited Stock
-
-
JN-150C
-
AucklandAvailable
-
ChristchurchSorry, not in stock. Please contact us to backorder
-
-
JN-BX200P
-
AucklandAvailable
-
ChristchurchAvailable
-
