Veritas Snug Plug Cutters - Imperial
Description
Veritas code 05J05.10
Set of three cutters - 1/4inch, 3/8inch and 1/2inch
It is always difficult to fit plugs perfectly, any slight runout in your drill press quill can make the holes oversize. Unfortunately; this runout will also make plugs undersize. The combination leads to ill-fitting plugs that are very noticeable in your finished work. Snug-Plug cutters are designed to cut slightly tapered plugs, the first 1/8inch of the plug is the stated size (1/4inch; 5/16inch; etc.) and then flares out at a 3 degrees included angle. Unlike regular plug cutters, they also shave the plug sides as they cut, producing very smooth plugs. You just tap a plug into a hole until you meet resistance, then cut off the excess. You will then have a plug that fits perfectly, with a nearly invisible line between the plug and the workpiece.
These plug cutters are carefully reamed after hardening to ensure perfect concentricity. It is difficult to believe how nice a plugging job you can do until you actually use one. 3/8inch shanks.
Patented. Resharpening instructions included.
-
AucklandLimited Stock
-
ChristchurchLimited Stock
You may also be interested in...
-
-
PSG-8PCE-L
-
AucklandAvailable
-
ChristchurchAvailable
-
-
PSG-8PCE-S
-
AucklandAvailable
-
ChristchurchAvailable
-
-
05J05-10
-
AucklandLimited Stock
-
ChristchurchLimited Stock
-
