Veritas Scraper Burnisher - Woodturning

Description

Veritas Code 05K35.01

For Woodturning Scrapers

This tool turns scrapers into cutting tools. Turners who are used to using scrapers with a grinder burr will be amazed at the difference a smooth edge-hook can make. After grinding a scraper; you just deburr the flat face and roll a hook onto the edge. The pressure you use determines the size of the hook. Two 25mm long carbide burnishing rods are supplied. One is ground at 10 degrees for burnishing scrapers with bevels of 70 degrees or 75 degrees. Veritas now include a second rod ground at 5 degrees to burnish 75 degrees to 80 degrees bevel angles.

Since the burnisher (clamped in a vise or screwed to a lathe stand) lets you use your entire body for leverage; you can even put hooks on HSS scrapers; something not possible with any other burnisher. Easy to use and includes full instructions. Designed for use with either full-size or miniature tools.

Made in Canada of aluminium; steel and carbide.

114mm long by 67mm wide.