Veritas Bevel Gauge
Description
Half the secret of sharpening is the control of blade geometry. Nothing is handier than a bevel gauge for quickly checking the grind angle of chisels; plane blades; turning tools; etc. A quick check confirms the angle last used for grinding or honing so that the edge geometry can be maintained. Veritas' bevel gauge has seven individual slots that will measure the most commonly used angles from 15deg to 45deg in 5 degree increments.
Your eye is a fine instrument - it can easily interpolate other angles in the range; angles like 24deg or 26deg. The slots on the gauge are about 19mm deep for good registration. The pocket-sized disc is 63.5mm in diameter and has a center hole for hanging it on a nail. Made of solid brass that will not damage a honed edge.
Made in USA.
-
AucklandLimited Stock
-
ChristchurchSorry, not in stock. Please contact us to backorder
You may also be interested in...
-
DMT-B8250
-
AucklandAvailable
-
ChristchurchLimited Stock
-
-
70M46-50
-
AucklandAvailable
-
ChristchurchSorry, not in stock. Please contact us to backorder
-
