27-12-2024
  • Pendulum clock with built in chime - suit dials up to 3/4" (19mm) thick
  • Pendulum clock with built in chime - suit dials up to 3/4" (19mm) thick
  • Pendulum clock with built in chime - suit dials up to 3/4" (19mm) thick
  • Pendulum clock with built in chime - suit dials up to 3/4" (19mm) thick

Pendulum clock with built in chime - suit dials up to 3/4" (19mm) thick

Stock Code:
CLK-2508XL
Price:
$115.00 inc GST

Description

All the battery operated pendulum movements have several things in common. They are all operated by an electro magnet that gives a pulse to a magnet on the pendulum arm, which gives the pendulum a very natural swinging motion. They also operate independently of the actual clock movement and have no effect on it. In most cases, when the battery on one of our pendulum movements gets low, the pendulum will stop swinging so that the movement can operate a bit longer.

Two factors must always be considered when using battery operated quartz pendulum movements. The first is the weight of the actual pendulum. Our pendulums are specifically designed to work with battery-operated movements. If you were to substitute a pendulum from an old mechanical movement, you would probably find that the pendulum is to heavy to be operated by a battery operated movement. The second is the operating position of the movement. The movement must be level, or perpendicular to the ground. If the movement is not properly leveled, then the pendulum may not operate properly, or at all.

This movement combines a pendulum with a chime.

The 2500 series Westminster chime movements are the most popular chime movements on the market today.
The reasons are simple, value and ease of use!
These Westminster chime movements are the only ones on the market today that feature both a chime synchronization knob and full "grandfather clock" style 4 x 4 Westminster chime.
A portion of the Westminster chime melody plays every fifteen minutes with the full melody and an hour count plays on the hour.

Runs on C battery.

This XL extra long version suits faces/dials up to 3/4" (19.05mm) thick.
threaded shaft is 15/16" (23.8mm)
total shaft is 1 1/4" (31.75mm) long.
threaded Shaft Diameter is 7/16", drill a 1/2" mounting hole size for best results

Set includes
* movement
* 406mm (16") adjustable pendulum rod (can be shortened)
* a 69.85mm (2 3/4") diameter bob
* all necessary hardware

Hands and numbers are NOT included with these movements and should be ordered separately.

Dimensions: 3" w, 4 3/4" h, 1 1/4" d

  • Auckland 
    Limited Stock
  • Christchurch 
    Limited Stock