Vac Chuck System 6 inch - 1 x 8tpi (V806)
Description
TMI Products Hold Fast Vacuum Kit
Hold Fast Vacuum Kit has everything you need to start vacuum chucking.
VCS kit includes:
V812 Vacuum Generator.
V802 Universal Vacuum Adapter.TMI Products Hold Fast Vacuum Kit
Hold Fast Vacuum Kit has everything you need to start vacuum chucking.
VCS kit includes:
V812 Vacuum Generator.
V802 Universal Vacuum Adapter.
V806-1 6 inch chuck head with 1" x 8 TPI thread.
Suitable for Teknatool Comet and other smaller lathes with the same spindle thread. Requires a 10mm hole through the headstock
Made in the USA.
----------------------
Hold Fast Vacuum Generator (included)
The V812 Series Vacuum Generators provides an economical vacuum source for all your Hold Fast vacuum chucking systems. Only requires a basic 2CFM compressor.
The V812 operates optimally with 80-90 PSI Air pressure.
Easy vacuum adjustment knob ideal for lower start up vacuum required with Stabilizing Resin chambers.
25+ In Hg vacuum at sea level.
small, compact, and quiet - just the light sound of air escaping.
Tip:
Mount closely to the working area with double-sided tape, Velcro, or magnets to provide easy reach for control of vacuum.
Vacuum Chuck Head - V806-1 (included)
Vacuum chuck heads are versatile and seal flat, concave, and convex surfaces.
Double O ring seals provide the optimal vacuum seal.
Tips:
Use the largest chuck that will fit your project. The holding vacuum is proportional to the size.
Double O ring seals may need to be re-glued after extensive use. Use a pressure-sensitive adhesive such as Aleene's Tack-It Over & Over adhesive.
Please see video
https://www.youtube.com/watch?v=3ihTFfcstog
Note - this unit will require an air hose fitting suitable for the customers air hose. This should be available from a local hardware.
V806-1 6 inch chuck head with 1" x 8 TPI thread.
Suitable for Teknatool Comet and other smaller lathes with the same spindle thread. Requires a 10mm hole through the headstock
Made in the USA.
----------------------
Hold Fast Vacuum Generator (included)
The V812 Series Vacuum Generators provides an economical vacuum source for all your Hold Fast vacuum chucking systems. Only requires a basic 2CFM compressor.
The V812 operates optimally with 80-90 PSI Air pressure.
Easy vacuum adjustment knob ideal for lower start up vacuum required with Stabilizing Resin chambers.
25+ In Hg vacuum at sea level.
small, compact, and quiet - just the light sound of air escaping.
Tip:
Mount closely to the working area with double-sided tape, Velcro, or magnets to provide easy reach for control of vacuum.
Vacuum Chuck Head - V806-1 (included)
Vacuum chuck heads are versatile and seal flat, concave, and convex surfaces.
Double O ring seals provide the optimal vacuum seal.
Tips:
Use the largest chuck that will fit your project. The holding vacuum is proportional to the size.
Double O ring seals may need to be re-glued after extensive use. Use a pressure-sensitive adhesive such as Aleene's Tack-It Over & Over adhesive.
Please see video
https://www.youtube.com/watch?v=3ihTFfcstog
Note - this unit will require an air hose fitting suitable for the customers air hose. This should be available from a local hardware.
-
AucklandSorry, not in stock. Please contact us to backorder
-
ChristchurchSorry, not in stock. Please contact us to backorder
You may also be interested in...
-
TMI-A877
-
AucklandAvailable
-
ChristchurchSorry, not in stock. Please contact us to backorder
-
-
TMI-P601
-
AucklandAvailable
-
ChristchurchSorry, not in stock. Please contact us to backorder
-
-
TMI-P602
-
AucklandAvailable
-
ChristchurchSorry, not in stock. Please contact us to backorder
-
-
TMI-V807-1
-
AucklandLimited Stock
-
ChristchurchSorry, not in stock. Please contact us to backorder
-
