CrushGrind "Shaft" & "Wood" Tungsten Carbide FSB Set
Description
Tungsten Carbide Forstner Style Bit Set.
Tungsten Carbide tips stay sharp longer than HSS as they resist wear. They are less likely to heat up during use and run at higher speeds than traditionally recommended for HSS bits. The speed obviously depends on the hardness of the wood - slower speeds are better with harder woods to avoid scorching but speeds between 1500 and 2000 rpm can be used on softer woods while achieving a good, clean cut.
This set contains the 4 diameter bits required for making both the CrushGrind Diamond shaft (195mm, 260mm & 470mm) and the shaftless Diamond Wood mechanism which is shaftless!
The 22mm diameter is for the stopper fixture at the top of the Diamond Shaft mechanisms.
The 25mm diameter is for the cavity for both Diamond Shaft & Diamond Wood.
The 38mm diameter is for the grinding mechanism for both Diamond Shaft & Diamond Wood.
The 42mm is for the opening of the grinder for both Diamond Shaft & Diamond Wood.
These self centering woodworking Forstner bits are carbide tipped to cut cleanly through end grain making them perfect for pepper and salt mills.
The shaft diameter for the 22mm and 25mm bits are 8mm and for the 38mm and 42mm it is 10mm.
Both will fit in the Forstner Bit Extension (EXTN-1) to extend the depth of drilling by 160mm.
Buy the set and save at least 15% on normal retail price.
-
AucklandAvailable
-
ChristchurchSorry, not in stock. Please contact us to backorder
You may also be interested in...
-
GRIND-12
-
AucklandAvailable
-
ChristchurchAvailable
-
-
CG-MAKEEDGE
-
AucklandAvailable
-
ChristchurchAvailable
-
-
-
